​Fleece Plaid with Leather Belts

You'll need:

Woolen fleece with transversal strips 1,40 m long and 140 cm wide;

Woolen yarn;

Embroidery needle;

3 leather dog trashes about 50 cm long;

1 leather belt about 9 cm long;

2 rivets;

Eyeletting pliers;

Hammer.

Size: 40 х 40 cm.

Instructions

Sew the cut sections of the fleece with buttonhole stitches: the width and length of the stitch is 1.5 cm.

On one collar, trim the ends so that the length of the collar is approx. 40 cm. Unscrew each end of this collar on its back side to a length of 4 cm and fold it in a loop. Pass the remaining collars into the formed loops and put hole marks on the outer and inner sides at the ends of the loops so that the collars threaded into the loops are displaced with force. Punch rivets according to the marking. Fix the ends of the collar, aligning the holes exactly.

Cut the buckle on the belt. Cut off the second end of the belt, leaving one hole for the buckle pin. Punch a hole at the first end of the belt. Place the ends of the belt on the collar loops from the inside, aligning the holes exactly and punch / screw in the rivets.