​How to Decorate T-Shirt with Sequins

You'll need:

Fabric with sequins;

T-shirt;

Rip device;

Threads;

Tailoring pins;

Needle;

Measuring rule;

Chalky pencil;

Scissors;

Awl.

Instructions

Turn the T-shirt on the wrong side and gently tear off the sleeves with the help of a sprayer. Spread the seam of each sleeve.

Lay out each sleeve in one layer and iron it well. Mark the front and back side of the sleeves with a chalk pencil, so that then they can be sewn in again correctly.

Pin each sleeve in the direction of the shared thread to the fabric with sequins on the wrong side.

Gently cut out sleeves from the fabric with sequins without allowances for the seams. At the same time, do not use cutting scissors - they may become dull.

On shiny sleeves, carefully remove the sequins using a spreader and an awl: along the lower cut - to a width of approx. 2 cm, along side sections and along the ridge - to a width of approx. 0.5-1 cm. The ends of the threads are tightly tied so that the remaining sequins do not crumble.

Fold each sleeve with sequins in half with the front side inwards and grind the side sections. If necessary, overcast the seam allowance and lower cut on the serger.

Manually sew individual sequins along the side seams to thereby hide the seams.

Tighten the lower section of each sleeve to the wrong side and sew it by hand. If necessary, sew individual missing sequins manually.

Stitch sleeves with sequins in the armholes of t-shirts. If necessary, fasten armholes on the serger and sew individual sequins manually.