​Helping our users. Cute Crochet Elephant.

You’ll need:

For the elephant:

200g of Color Made Easy in Shade;

Crochet hook 4mm;

White felt for toenails;

White sewing thread and sewing needle to sew on toenails;

Black crochet thread for eye;

Tapestry needle;

Stuffing;

For the flowers:

Color Made Easy in Millennial;

Crochet hook 3.5mm;

Loops & Threads Capri in White;

For the bird:

Caron Simply Soft in Sunshine;

Crochet hook 2.75mm;

Black Crochet Thread;

For the balloon:

Caron Simply Soft in Harvest Red;

Crochet hook 2.75mm;

Black crochet thread.

Instructions

Tail

Using a 4mm hook and your grey yarn.

Row 1: Chain 10, in 2nd ch from hook, dc 2, hdc 2, sc 2, slst 2 (8 sts)

Tie off. Repeat row 1 for second panel. Put both panels together and crochet around to join. Stuff lightly. Slst to first st to close and tie off.

Front Body

The body is split up into three sections: (1) the front leg, and (2) the back leg, which are then joined together to create (3) the body.

The panels are worked from the bottom up with a 4mm hook.

*Ch 1 and turn at the end of each row unless specified otherwise*

Front Leg

Row 1: Chain 8, sc across chains (7 sts)

Row 2: Inc twice, sc 5 (9 sts)

Rows 3-4: Sc across (9 sts)

Row 5: Sc 7, dec (8 sts)

Row 6: Sc across (8 sts)

Row 7: Sc 6, dec (7 sts)

Tie off.

Back Leg

Row 1: Chain 19, sc across (18 sts)

Row 2: Inc, sc 16, inc (20 sts)

Row 3: Inc, sc 19 (21 sts)

Rows 4-5: Sc across (21 sts)

Row 6: Dec, sc 19 (20 sts)

Row 7: Sc 18, dec (19 sts)

Tie off.

Body

In the next row, we will attach the front leg and the back leg together to create the body. Once joined, the back leg will overlap onto the front leg to make the elephant look like she is sitting.

Take the front leg and turn it so that the wrong side is facing you (hint: the yarn tail of the starting chain will be pointing to the right).

Row 8: Dec, sc 3, dec, chain 6. With the front leg still attached to your hook, take the back leg and turn it so that the wrong side is facing you. Skip 6 stitches on the back leg and insert your hook into the 7th stitch on the back leg. Sc 13 across the back leg. (24 sts including chains)

In the next row, you will crochet across the stitches, including the chains to create one full row. Check out the video if you’re still unsure!

Row 9: Dec, sc 22 (23 sts)

Row 10: Dec, sc 21 (22 sts)

Row 11: Dec, sc 20 (21 sts)

Row 12: Dec, sc 19 (20 sts)

Row 13: Dec, sc 18 (19 sts)

Row 14: Dec, sc 17 (18 sts)

Row 15: Sc across (18 sts)

Row 16: Dec, sc 14, dec (16 sts)

Row 17: Sc across (16 sts)

Tie off.

Repeat all of the above for the second panel.

Next, you will cut out three small ovals from white felt and sew them onto the front panel for the toenails. The toenails I cut were 5cm wide and 6cm high. Using white sewing thread and a sewing needle, sew two onto the back leg and one onto the front leg.

Now we will assemble the body. Here are the pieces you should now have:

Now, starting on the left side of the body at the top, begin attaching the panels together by chaining one and single crocheting around the outside of the panels. Crochet down the front leg, (Sc, ch 1, sc) into each of the bottom corners of the front leg, up the other side of the front leg, then across the top of the back leg, down the back leg and across the bottom of the elephant. Stop here for now.

With your tapestry needle and yarn, place the tail between the panels and sew it in place by sewing through all three pieces; the back panel, the tail and the front panel. Tie a knot in the yarn tails to secure and hide them inside the panels. Continue crocheting around the panels.

When you get to the tail, simply crochet in the stitches of the front panel only, since this section is already sewn shut.

Stop when you get to the top of the body (i.e. when just the top is open). Stuff firmly. Continue crocheting across. Top up stuffing as you go. Close with a slst to first st and tie off.

Ear

Row 1: Chain 9, sc across (8 sts)

Row 2: Dec, sc 4, inc twice (9 sts)

Row 3: Inc, sc 6, dec (9 sts)

Row 4: Dec, sc 6, inc (9 sts)

Row 5: Inc, sc 6, dec (9 sts)

Row 6: Dec, sc 6, inc (9 sts)

Row 7: Sc 7, dec (8 sts)

Row 8: Dec, sc 5, inc (8 sts)

Rows 9-10: Sc across (8 sts)

Row 11: Sc 6, dec (7 sts)

Rows 12-13: Sc across (7 sts)

Row 14: Inc, sc 4, dec (7 sts)

Row 15: Sc across (7 sts)

Row 16: Inc, sc 4, dec (7 sts)

Row 17: Dec, sc 1, Dec twice (4 sts)

Tie off.

Repeat rows 1-17 for the second panel. Place both panels together and sc around to join. Stuff firmly when you’ve crocheted about two-thirds around. Continue crocheting around, topping up stuffing as you go. Slst to first st to join. Tie off and weave in yarn tail.

Head

Row 1: Chain 11, sc across (10 sts)

Row 2: Inc, sc 7, inc twice (13 sts)

Row 3: Inc, sc 10, inc twice (16 sts)

Row 4: Inc, sc 13, inc twice (19 sts)

Row 5: Inc, sc 17, inc (21 sts)

Row 6: Inc, sc 19, inc (23 sts)

Row 7: Inc, sc 22 (24 sts)

Row 8: Inc, sc 23 (25 sts)

Row 9: Inc, sc 24 (26 sts)

Rows 10-11: Sc across (26 sts)

Row 12: Inc, sc 24, inc (28 sts)

Now we will finish the head and then come back and crochet the trunk later. We will be crocheting only part way across the row in row 13 before chaining and turning.

Row 13: Sc 23 (23 sts)

Row 14: Sc 23 (23 sts)

Row 15: Dec, sc 19, dec (21 sts)

Row 16: Dec, sc 19 (20 sts)

Row 17: Dec, sc 18 (19 sts)

Row 18: Dec, sc 15, dec (17 sts)

Row 19: Dec, sc 13, dec (15 sts)

Row 20: Dec, sc 11, dec (13 sts)

Row 21: Dec twice, sc 5, dec twice (9 sts)

Tie off.

Trunk

With the right side of the panel facing you (i.e. the unworked sts of row 12 of the head are pointing toward the left, as seen in the pictures below), join your yarn into the 4th st:

Row 1: Sc 4 (4 sts)

Row 2: Sc 2, dec (3 sts)

Row 3: Dec, sc 1 (2 sts)

Rows 4-5: Sc 2 (2 sts)

Row 6: Inc twice (4 sts)

Row 7: Inc, sc 2, inc (6 sts)

Row 8: Ch 2, dc, hdc, sc 2, hdc, dc (6 sts)

Tie off. Repeat the above for the second head panel.

Assembly

Step 1: Eye and Cheek

First, stitch on the eye using black crochet thread. Then stitch some pink thread around a stitch beneath the eye two or three times for the cheek.

Step 2: Head, Body and Ear

Cut off two lengths of yarn about 30cm/12″ long each and set them aside for later.

Place the two head panels together, matching up all sides.

You will start on the left side in the middle of the trunk. Begin attaching the panels together by chaining one and single crocheting around the outside of the panels.

Stop when you get to the bottom of the head and pull up a loop. Now we will attach the head to the body.

With your tapestry needle and a length of grey yarn that you set aside earlier, place the body between the panels of the head and attach the two together by sewing through all three pieces; the top panel, the body, and the bottom panel. When finished, tie a knot to secure and hide the yarn tails between the panels of the body.

Now we will attach the ear. The top of the ear will line up with the head about 3 rows down from the top, so that your elephant looks like she is raising her head. The bottom of the ear will overlap onto the body a little. With your tapestry needle and a length of grey yarn that you set aside earlier, place the ear between the panels of the head and attach the two together by sewing through all three pieces; the top panel, the ear, and the bottom panel. When finished, tie a knot to secure and hide the yarn tails between the panels of the body.

Continue crocheting around the head. When you get to the body and the ear, simply crochet in the stitches of the front panel only, since this portion is already sewn shut.

Stop when you get to the top of the head. Stuff the head firmly.

Continue crocheting across the head, topping up stuffing as you go. Crochet up the side of the trunk, across the top of the trunk, and down the other side, stuffing as you go. You may need to use the back of a crochet hook to push the stuffing into the trunk.

When you’re satisfied, continue crocheting around and close with a slst to first st. Tie off. With your tapestry needle, poke the yarn tail back inside the piece.

Step 3: Finishing Touches

Flowers

I opted to add a flower crown to my elephant. I made 4 flowers in 2 different sizes. I achieved the two different sizes simply by using a bulky (size 5) yarn and a worsted weight (size 4) yarn. I used a 3.5mm hook for both.

Rnd 1: Sc 5 into a magic ring, slst to beginning st.

Rnd 2: [Ch 1, hdc, dc 3, hdc] all into the same st, slst to next st and repeat [ ]. Repeat until you have 5 petals. Slst to beginning st to close. Tie off.

Sew the flowers onto your elephant’s head.

Bird

In Sunshine yarn using a 2.75mm hook:

Row 1: Ch 6, sc 5 (5 sts)

Row 2: Inc, sc 3, inc (7 sts)

Row 3: Sc across (7 sts)

Now we will crochet the tail, so you will crochet only part way across the previous row before chaining one and turning.

Row 4: Sc 3 (3 sts)

Row 5: Dec, sc 1 (2 sts)

Row 6: Dec (1 st)

Row 7: Sc 1 (1 st)

Tie off.

Now we will go back and work the head on the remaining sts of row 3. Turn your panel so the wrong side is facing you. Skip 2 sts from the tail and join your yarn into the next st.

Row 4: Sc, inc (3 sts)

Rows 5-7: Sc 3 (3 sts)

Row 8: Sc3tog (i.e. work one decrease across all three sts) (1 sts).

Tie off. Repeat all of the above for the second panel. Stitch a little happy eye onto the front panel.

For the beak, use a 1.75mm hook and black crochet thread, and chain 3, sc 2 (2 sts). Sew the beak between the panels. Crochet around the panels to join. Stuff lightly.

Balloon

Using a 2.75mm hook and Harvest Red yarn.

Row 1: Chain 4, sc across (3 sts)

Row 2: Inc, sc 1, inc (5 sts)

Row 3: Inc, sc 3, inc (7 sts)

Row 4: Inc, sc 5, inc (9 sts)

Row 5: Inc, sc 7, inc (11 sts)

Row 6: Inc, sc 9, inc (13 sts)

Row 7: Sc across (13 sts)

Row 8: Inc, sc 11, inc (15 sts)

Rows 9-13: Sc across (15 sts)

Row 14: Dec, sc 11, dec (13 sts)

Row 15: Dec, sc 9, dec (11 sts)

Row 16: Dec twice, sc 3, dec twice (7 sts)

Row 17: Dec, sc 3, dec (5 sts)

Tie off.

Repeat rows 1-17 for the second panel. Cut a length of black crochet thread (or yarn) about 15cm/6″ long and stitch it into a stitch in the inside of one of the panels so that it hangs down from the bottom of the balloon. Place the two panels together and crochet around to join. (Sc, ch 1, Sc) in the bottom corners to create the square shape of the tied off part of the balloon. Make sure the string is hanging down from this part as you crochet across the bottom.