Sweet Bouquet
You'll need:
Instructions
Make blanks for a bouquet of marshmallows (100 g) in the form of white cylinders (diameter about 2.5-3 cm) of white color. Paste sweets 1 trick per stick along or across the sweets. To create an additional volume of the bouquet, you can make several "flowers" from several pieces of marshmallows.
Make blanks of white and pink marshmallows in the form of cubes (100 g), stringing each on one stitch.
To form a bouquet, use a round cutting board or stand with a diameter of 30-40 cm, which will facilitate your assembly. In the center of the board, place a large marshmallow with the stitches up. Surround the central “flower” with smaller marshmallows.
Continue to add elements to the bouquet, after every 4-5 sweets, fix the stiches with tape.
Having made a round bouquet, securely fix the position of the “stems”, having passed another 5-8 turns with adhesive tape to the very bottom of the bouquet.
Wrap the stem of the bouquet with tape.
From a sheet of kraft paper (0.8 m × 2.5 m), cut a rectangular piece about 25 cm × 35 cm in size. Wrap the sticky leg in paper, positioning it so that it covers the entire adhesive tape.
Tie the paper with satin ribbon 22.5 cm wide, cut from a common piece of ribbon (4 m).
Place the bouquet on a piece of kraft paper so that it protrudes 10 cm above the bouquet, and its length is slightly larger than the diameter of the bouquet (2-3 cm). Cut the paper to that size.
Fold the top edge of the paper 10 cm, stroke the fold line with your hand. Wrap the bouquet, leaving the bent edge inside. Fix the edges of the paper with a stapler, if you do not have one, use tape.
Squeeze the wrapping paper around the stem of the bouquet, tie satin ribbon 2 cm wide, attach a small greeting card.
Tie a beautiful bow on the stem of the bouquet, cut the ends of the ribbon at an angle.
Cut a piece of transparent floristic film to the size of the bouquet, adding 25-30 cm to the height of the bouquet, glue the sides together with adhesive tape along the length, making a sleeve. With the stem forward, lower the bouquet into the sleeve so that the bottom edge of the paper matches the bottom edge of the sleeve.
Cut a piece of transparent floral film to the size of the bouquet