Pearl Bow Brooch
You'll need:
Small pearl beads;
Felt;
Needle and thread;
1 oval shaped bead;
Brooch pin;
A template for the bow.
Instructions
Draw the shape of the bow you want your pin to look like.
Cut your drawing/printout and use as pattern to cut the felt. You will need 2 pieces of Part A and 1 piece of Part B.
Sew the small pearl beads into a piece of Part A. I started from center, then moving to the edges of one side of the bow. The illustration below shows how I filled out one side of the bow. As you get to the center, make sure the beads look evenly spaced and there is no big empty spot. Repeat for the other side of the bow.
Sew the center bead or whatever you plan to use for the center of the ribbon.
Sew beads on to Part B.Sew below the dotted line (see illustration below).
Use glue to attach the part ABOVE the dotted line of Part B to the back of Part A.
Glue the 2nd piece of Part A to the back of the combined pieces of Parts A and B.
Glue the pin to the back. Cut a small piece of felt and glue it across the pin to secure it.
No comments
Write a comment