​Umbrella Pillow

You'll need:

Several pieces of fabric 30 x 30 cm;

Strip of fabric 2 m x 6 cm;

Stuffing;

Threads;

Scissors;

Paper for pattern design;

Pins;

Chalk;

Sewing machine.

Instructions

Transfer the drawing of the umbrella, which can be downloaded for free on our website, onto paper and enlarge to the desired size. Lay out patterns on fabric cuts. We used 5 different polka dot fabrics for the umbrella itself and striped fabric for the handle and side parts.

Cut each part from the fabric in duplicate, adding 5 mm on each side to the hem.

Chip the parts together with pins, starting from the extreme segment, moving towards the center. Pin the pen and cap.

Sew the parts together and iron them properly.

Pin the side parts and sew them on the sewing machine.

Sew the second part of the umbrella and insert it into the part with the side elements with the sides inward and chip. Sweep the two sides away with the safety pins. Sew on the machine, leaving a 7-8 cm hole on the stuffing handle unstitched. Remove the basting, unscrew the product and fill it with a padding polyester. Sew on the stuffing hole.