You'll need:
Big metal ring;
Small metal rings;
Double metal rings - 3 pcs;
Needle-nose pliers - 2 pcs;
Waxen cord;
Rubber cord;
Pandora beads - 2 pcs;
Bale;
Carbine;
Clips for cord - 2 pcs;
Metal wings pendant - 3 pcs.
Instructions
Wrap the base with waxen cord in spiral order, bind the ends of the corf together with double knot.
With needle-nose pliers, expand the number of connecting rings you need, so it will be easier to work in the future.
Put open rings and tightly close them on the base ring. This will be the first row of weaving.
Connect the rings between each other in pairs, passing through them another one. This will be the second row.
You need to move in one direction, so that the edge of one ring lies on top of the other everywhere the same.
Either from right to left, or vice versa, it makes no difference. Thus, we completely go through the circle and at the end connect the first and last rings, closing it.
The ring of the third row is threaded into the slot at the junction of two rings of the second row, and also insert a double ring into it, after which all the rings of the third row will subsequently be fixed. A double ring with tension can withstand a large load and does not deform, so it fits perfectly to the center of your pendant.
After connecting one ring, do the same with the others, only the central ring remains unchanged. The result should be a perfectly symmetrical metal web.
Now let's turn to decoration of pendant. In a knot formed by a waxen cord, pass another one but the same, but shorter, and tie its end from the inside with a knot. It turned out the basis for three pendants.
Take metal feathers and fix them with a knot at the ends of the cord.
Two side feathers are attached higher, and the central cord can be lowered just below the level.
In the metal ring of the first row, which is located at the top, in the center of the pendant, insert the connecting ring with a bale attached to it - a metal holder with a beautiful ornament.
Pass the rubber cord through the bale and string Pandora beads on both sides of the center.
The ends of the rubber cord are fixed with special metal clips.
Insert a double ring into each clamp, so the tier will be perfectly durable.
Attach a carbine to one of the rings.
